23 Day Mix Kits with Injectable HCG

Basic Mixing Guide:

Gather all of your supplies before you begin, including your HCG vial or ampoule.  The dry-powered
HCG vial or ampoule normally comes with a 1ml ampoule/vial of liquid/solvent.  You may discard the
solvent ampoule, since we will be using the Bacteriostatic water as our solvent.  Although not harmful,
it is considered best not to mix the two types of solvent.  It is also considered best not to store your
finished solution in the Bacteriostatic Water vial, which is made of plastic.  A glass vial is recommended
for your HCG, which is provided in the kit.  After mixing--always refrigerate the liquid HCG.  With
proper refrigeration, the 5000 or 10000 IU solution will remain potent for the 43 days, or 23 days,
needed to finish your weight loss cycle.  If there is any solution remaining after your entire cycle of
weight loss is complete, we recommend that it be discarded at that time.  Its potency could have
become depleted over time and we cannot confirm the exact shelf life of HCG once it has been
suspended in solution (mixed).  There should be an expiration date printed on the ampoule containing
the original powdered form of HCG.  Always check this date first.  Replace if expired.

Try to minimize the time that the finished solution is left out at room temperature.  When you prepare
your daily injection, fill your syringe and replace the HCG in the refrigerator quickly.  You may want to
let the loaded syringe warm-up for a few minutes before you administer the injection. Alcohol wipes are
provided for cleaning the top of the vials, the ampoules, and to clean the injection site.

First, you must mix the HCG in the proper concentration.  Dr. Simeons and Kevin Trudeau both
recommend a dosage in the range between 125 IU and 200 IU per day.  More than this is not better and
may actually lessen the effectiveness.  A larger dose will certainly hasten immunity to the positive
effects.  Skipping an injection 1-day per week is recommended on the 43-day protocol, and the skipped
day should always remain on the same day of the week.  Each injection should be given as near to the
same time each day as possible.  We will base our example injection volume, of 1cc, to fall within the
proper range of concentration in these instructions.  You are free to increase or decrease the injection
volume, depending on your own preference, as long as you recalculate the solute to solvent ratio to
remain within the suggested range of concentration. Also, make sure you have enough HCG on hand to
complete the cycle.

You must use the large syringe and its separate needle for this mixing process.  The needles of the other
smaller syringes will be too short to get near the bottom of the ampoule when withdrawing the solution.  
You will not be using these larger syringe(s) for your injections.  

Flip the top off of the Bacteriostatic Water and sterilize the stopper with an alcohol wipe.  Next, remove
the covering, if any, on one glass vial to expose the stopper and sterilize it with an alcohol wipe.  Now,
flip the top off and sterilize the stopper of the HCG vial containing the dry powdered HCG.  Attach the
needle to the large syringe and withdraw 1cc from the Bacteriostatic Water vial.  Slowly inject the water
from the syringe through the stopper of the HCG vial.  It will quickly dissolve.  Next, withdraw every
drop of this solution back into the same syringe and inject it into the empty glass vial through the
stopper.  Now, using the same syringe, withdraw 24 cc of plain Bacteriostatic Water and inject it into
the glass vial containing the 1cc of HCG that you just finished mixing.  Now, each day you will take a
1cc injection using the smaller injection needles from this vial until it is time to mix again or until your
weight loss cycle is complete. (Concentration of 200 IU per 1cc)

Important:  When exchanging liquids from the Bacteriostatic Water Vial and the Empty Sterile Vial, you
must keep the air pressure inside the vials equalized with the air pressure in the room.  For example, if
you try to draw out 30 ml of Bac-Water all at once, a vacuum pressure will be created inside the vial
and the water will fail to flow into the syringe.  You must inject air into the vial to prevent this from
happening.  And you may need to do this more than once during the mixing process.  Conversely, when
injecting solution into the empty sterile vial, you must withdraw an equal volume of air from the vial to
allow space for the solution that is about to be injected.  You may use one of your smaller syringes to
perform the air pressure equalizations if you wish.

23-Day Kit for 5000 IU Vials:

Kit Includes: 25—Disposable Sterile Needle/Syringe Combos, 1--30cc Sterile capped vial, 1--Large
Syringe w/needle, 1--30cc vial of Bacteriostatic Water, 30--Alcohol Wipes.  

If you were to choose a more dilute option for this 23-day cycle, you would be wasting the remaining
solution after 23 days of injections.  (Included is 1 -- 5000 IU ampoule of HCG to achieve this result.)


43 Day Mix Kits with Injectable HCG

Basic Mixing Guide:

Gather all of your supplies before you begin, including your HCG vial or ampoule.  The dry-
powered HCG vial or ampoule normally comes with a 1ml ampoule/vial of liquid/solvent.  

You may discard the solvent ampoule, since we will be using the Bacteriostatic water as our
solvent.  Although not harmful, it is considered best not to mix the two types of solvent.  It is
also considered best not to store your finished solution in the Bacteriostatic Water vial, which
is made of plastic.  A glass vial is recommended for your HCG, which is provided in the kit.  
After mixing--always refrigerate the liquid HCG.  With proper refrigeration, the 5000 or
10000 IU solution will remain potent for the 43 days, or 23 days, needed to finish your weight
loss cycle.  If there is any solution remaining after your entire cycle of weight loss is complete,
we recommend that it be discarded at that time.  Its potency could have become depleted over
time and we cannot confirm the exact shelf-life of HCG once it has been suspended in solution
(mixed).  There should be an expiration date printed on the ampoule containing the original
powdered form of HCG.  Always check this date first.  Replace if expired.

Try to minimize the time that the finished solution is left out at room temperature.  When you
prepare your daily injection, fill your syringe and replace the HCG in the refrigerator quickly.  
You may want to let the loaded syringe warm-up for a few minutes before you administer the
injection. Alcohol wipes are provided for cleaning the top of the vials, the ampoules, and to
clean the injection site.

First, you must mix the HCG in the proper concentration.  Dr. Simeons and Kevin Trudeau both
recommend a dosage in the range between 125 IU and 200 IU per day.  More than this is not
better and may actually lessen the effectiveness.  A larger dose will certainly hasten immunity
to the positive effects.  Skipping an injection 1 day per week is recommended on the 43 day
protocol, and the skipped day should always remain on the same day of the week.  Each
injection should be given as near to the same time each day as possible.  We will base our
example injection volume, of 1cc, to fall within the proper range of concentration in these
instructions.  You are free to increase or decrease the injection volume, depending on your
own preference, as long as you recalculate the solute to solvent ratio to remain within the
suggested range of concentration. Also, make sure you have enough HCG on hand to complete
the cycle.

You must use the large syringe and its separate needle for this mixing process.  The needles of
the other smaller syringes will be too short to get near the bottom of the ampoule when
withdrawing the solution.  You will not be using these larger syringe(s) for your injections.  

Flip the top off of the Bacteriostatic Water and sterilize the stopper with an alcohol wipe.  
Next, remove the covering, if any, on one glass vial to expose the stopper and sterilize it with
an alcohol wipe.  Now, flip the top off and sterilize the stopper of the HCG vial containing the
dry powdered HCG.  Attach the needle to the large syringe and withdraw 1cc from the
Bacteriostatic Water vial.  Slowly inject the water from the syringe through the stopper of the
HCG vial.  It will quickly dissolve.  Next, withdraw every drop of this solution back into the
same syringe and inject it into the empty glass vial through the stopper.  Now, using the same
syringe, withdraw 24 cc of plain Bacteriostatic Water and inject it into the glass vial
containing the 1cc of HCG that you just finished mixing.  Now, each day you will take a 1cc
injection using the smaller injection needles from this vial until it is time to mix again or until
your weight loss cycle is complete. (Concentration of 200 IU per 1cc)

When you have used all of the solution after 24-25 days, repeat this process with a new bottle
of Bacteriostatic Water, a new large syringe and needle, a new glass vial, a new alcohol wipe,
and a new vial of HCG.

Important:  When exchanging liquids from the Bacteriostatic Water Vial and the Empty Sterile
Vial, you must keep the air pressure inside the vials equalized with the air pressure in the
room.  For example, if you try to draw out 30 ml of Bac-Water all at once, a vacuum pressure
will be created inside the vial and the water will fail to flow into the syringe.  You must inject
air into the vial to prevent this from happening.  And you may need to do this more than once
during the mixing process.  Conversely, when injecting solution into the empty sterile vial, you
must withdraw an equal volume of air from the vial to allow space for the solution that is
about to be injected.  You may use one of your smaller syringes to perform the air pressure
equalizations if you wish.

43-Day Kit for 5000 IU Vials Include: 2 -- 5000 IU vials of HCG to maintain the ratio for the
entire cycle.

Kit Includes: 45—Disposable Sterile Needle/Syringe Combos, 2--30cc sterile capped vials,
2--Large Syringes w/needles, 2--30cc vials of Bacteriostatic Water, 60--Alcohol Wipes.  
HCG Cure Kits
Mixing Instructions